![]() ![]() RELATED: 20 THINGS YOU SHOULD KNOW ABOUT YOUR HOME INSPECTION 2. It should only go in about half an inch if there’s a stud there. Mark where you think you’ve found the stud, and slowly hammer the nail into that area. Pro-Tip: Use a trim nail to double-check. If you notice they’re generally 16-24″-inches apart, then you’ve definitely found your marks. Try to find a few studs along the same wall and mark them as you go. Figuring out how to find a stud in a plaster wall this way takes some patience because the changes in density can be difficult to discern. Eventually, what you’ll hear instead is a high pitched sound reverberating off the studded post. Move horizontally along the wall (giving a couple of raps along the way) until that echo dissipates. You want to look out for a faint echo behind each knock. A simple double tab with your knuckle against a wall is enough to do the trick. This is the method you’ll find most professionals using to locate a stud in an old home. RELATED: ARE HOME INSPECTIONS WORTH THE COST? 1. With a couple of household items and a keen eye, you’ll be able to find your studs in minutes. So we have to find creative ways to figure out where these studs are. You can simply use a stud finder to find the perfect spot these days, but this won’t work reliably on older homes. Imagine hanging a 50 pound framed piece of artwork on nothing but drywall.Įnsuring your wall décor is anchored to these studs means they’ll stay in place until you decide to take them down again. ![]() Studs are the wooden or metal beams that support the walls in your house. This means that your standard stud finder won’t be able to detect a change in density because it’s all dense.Īnytime you want to hang something on your wall- whether it’s 0.5 pounds or 50 pounds- you want it to be attached to a stud. Vertical studs, wooden beams, and plaster make up the structure of older homes. Here are five ways to find a stud in a plaster wall: How To Find a Stud in a Plaster Wall But don’t worry- there are still ways to locate studs in these walls! So what’s the solution to finding studs in older homes? Some people say to use a magnet, but that also won’t work if you have metal lath. And if the lath is a metal wire type, instead of older wood lath, a stud finder will produce false readings. Plaster can be too thick or dense to find a stud with common stud finders, which is probably why you’re finding that these don’t work. These were “wet” applied walls (not to be confused with the similar-sounding “wet wall” that contains plumbing pipes). Learning how to find a stud in a plaster wall takes some patience, but we have a few tricks up our sleeve that will save you time.īack in the day, home builders had to trowel the wall finish on with plaster over a lath base (kind of like how stucco is applied). But on some older homes from the mid-1970s and prior, there’s a good chance you may have plaster walls instead. It’s pretty simple to find a stud in common drywall. ![]()
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |